ELECTRONICS

MINILABS


MLD1 - DIGITAL LAB



         
MLD1 - DIGITAL LAB

Digital Lab is designed for the beginners to enhance the comprehension of digital theory.
The design of MLD1 is easy to operate and easy to understand, with switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless breadboard

MLD2 - DIGITAL LAB



         
MLD2 - DIGITAL LAB

Digital Lab is designed for the beginners to enhance the comprehension of digital theory. The design of MLD2 is easy to operate and easy to understand.
With breadboard, digital circuits, flip-flops and monostable multivibrators, counters, encoders, decoders, multiplexers, demultiplexers and sequencers, resistor, LED and 7 segments LED displays, memory devices, etc..

MLL1 - LOGIC LAB



         
MLL1 - LOGIC LAB

Logic Lab is designed for the logic beginners to enhance the comprehension of basic logical theory.
The design of MLL1 is easy to operate and easy to understand. It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless breadboard

MLCS1 - DIGITAL/LOGIC LAB



         
MLCS1 - DIGITAL/LOGIC LAB

Digital/Logic Lab is designed for the logic beginners to enhance the comprehension of basic logical theory.
The design of MLCS1 is easy to operate and easy to understand. It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator

MLD18 - COMBINATORY LOGIC LAB



         
MLD18 - COMBINATORY LOGIC LAB

The Trainer Lab can be arranged on a pair of supports for a better reading of the block diagrams and an easier use of the connecting leads.
This module must show a schematic diagram and 2 mm terminals for the electrical connection. The case of the module must be made in metal material.
This board allows the study of the following combinatory circuits: adders, subtractors, multipliers, code converters, multiplexers and demultiplexers

MLD19 - SEQUENTIAL LOGIC LAB



         
MLD19 - SEQUENTIAL LOGIC LAB

The trainer lab can be arranged on a pair of supports for a better reading of the block diagrams and an easier use of the connecting leads.
This module must show a schematic diagram and 2 mm terminals for the electrical connection. The case of the module must be made in metal material.
This board allows the study of the following subjects: MSI circuits in TTL logic, synchronous and asynchronous counters, shift registers, astable and monostable multivibrators, seven segment displays.

MLD190 - ANALOG/DIGITAL LAB



         
MLD190 - ANALOG/DIGITAL LAB

The MLD190 digital-Analog Training System is designed for the beginners to enhance the comprehension of digital and analog theory.
The design of Digital-Analog Training System is easy to operate and easy to understand, with switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless breadboard

MLD001- PROJECT BOARD



         
MLD001- PROJECT BOARD

x Power switch with light
x AC 110/220V, 120/240V, 50/60Hz
x Gross weight: 2,5Kg
x DC power: +5V / 1A 0…±15V / 500mA
x Equipped with short circuit protection circuit
x Solderless bread board 2420 tie points

MLD8086 - 16 BIT MICROPROCESSOR LAB



         
MLD8086 - 16 BIT MICROPROCESSOR LAB

- Program debugging function by PC.
- Program Download and trace function.
- Display to register contents
- Memory contents modification and dump function.
- Various command function.
- Include with step motor interface circuit.
- Dot matrix experiment.
- LCD(Liquid Crystal Display) 16 X 2 line experiment.
- D/A and A/D converter experiment.
- Sound experiment by speaker.
- Interrupt experiment
- A/D converter experiment by thermistor
- D/A converter experiment by Level meter.
- Key board experiment
- External interface connector.
- LED display of current system bus status.

MLD68000 - 16 BIT MICROCONTROLLER LAB



         
MLD68000 - 16 BIT MICROCONTROLLER LAB

- RS-232C communication (Terminal mode and Host mode)
- Down-Load and Up-Load function
- Program trace function
- Program/Data memory content modification and dump function
- ROM writer function (2764~27512)
- I/O experiment
- Include with printer port
- DOR matrix (3 color) experiment
- Interrupt function
- Disassemble function
- Resister contents modification and display function
- Baud-rate select function
- Various command function
- Software debugging function by break point
- External interface connector.
- Current system bus status LED display
- +5V, +12V, -12V S.M.P.S(Free Voltage)

MLD900 - KIT OF EQUIPEMENT FOR ELECTRONIC BASE TRAINING



         
MLD900 - KIT OF EQUIPEMENT FOR ELECTRONIC BASE TRAINING

The electronic circuits and circuit patterns can be very complicated to learn for a student who learns to these arguments. Thanks to our kit they will overcome all difficulties in learning because the student can immediately put into practice and perform with his own hands without any risk everything he has studied at the theoretical level.
The kit consists of a series of components which will perform all the exercises needed to understand the basic electronic and interpret the patterns of circuits.
Claque component is inserted inside a plexiglass box with transparent connections that will be fixed on 4mm sockets. This type of structure allows the student to see the component and at the same time see through printing more than a symbol of the circuit, so as to immediately understand the nexus between the real components and patterns circuit. The integration of components inside the box allows a high mechanical strength and electrical safety. The kit is provided with a plate of 4mm sockets so as to allow the student to achieve simplicity and security with each circuit provided in the tests given in the manual.
The product is equipped with various power sources in order to adapt to any requirement operative. Fontes fixed stabilized supplies, food and continuous variable alternating. In the kit was also inserted a generator function variable in shape, size and frequency.
The components and the kit with all the accessories were planned so that it can be inserted inside a case and allow for easy transport and deposited