AUTOTRONICS

MODULAR PANELS SYSTEMS


AUT/1P



         
Ignition System
The panel systems enable learning how to combine, verify and evaluate the parameters of the vehicle system subassemblies. You can configure it liberally.
The system consists of:

- Distributor ignition system with Hall-effect sensor
- Distributor ignition system with Inductive sensor
- Distributor ignition system with Hall-effect sensor and ECU Electronic Control Unit

AUT/2P



         
Vehicle System Sensors
The panel systems enable learning how to combine, verify and evaluate the parameters of the vehicle system subassemblies. You can configure it liberally.
The system consists of:

- mass and volume air flow meters check system
- MAP sensor check system
- knock sensor
- engine and air temperature sensor
- lambda sensor
- rotation speed active sensor
- speedometer sensor
- acceleration sensor
- rotation direction sensor
- set of the main vehicle system sensors
- differential pressure sensor
- oil pressure sensor
- fuel level sensor

AUT/3P



         
Vehicle System Actuators
The panel systems enable learning how to combine, verify and evaluate the parameters of the vehicle system subassemblies. You can configure it liberally.
The system consists of:

- auxiliary air valve, idle control valve
- EGR valves
- evaporative emission (EVAP) canister purge valve
- electro-pneumatic valve, electro-hydraulic valve
- fuel injector
- stepper motor
- electronic throttle unit
- idle valve regulating unit
- MONO-JETRONIC throttle unit
- central locking system, alarm system
- rectifier unit with 6 and 9 diodes
- alternator voltage regulator
- radio wireless set with a set of loud-speakers

AUT/4P



         
Lighting
The panel systems enable learning how to combine, verify and evaluate the parameters of the vehicle lighting system subassemblies. You can configure it liberally.
The system consists of:

- direction indicators
- hazard lights
- window wash system
- driving lights and parking lights
- fog lights
- brake and reversing lights
- headlight lift regulator
- vehicle interior lighting
- wiper equipment
- vehicle horn sound

AUT/5P



         
System of the Automotive Electrics and Electronics
The panel system enables learning how to combine and measure the basic AC/DC circuits, how to evaluate the parameters of electronic subassemblies such as: resistances, capacities, inductances, semiconductors, optoelectronics and basic systems of digital and analogue electronics You can configure it liberally.
The system consists of.

- resistors, resistance decade
- capacitors, bulbs
- transistors: bipolar, bipolar-Darlington, unipolar MOSFET
- diodes
- Schmitt trigger
- thermistor sensors
- photo-elements
- digital display
- logic gates
- A/D converter
- operational amplifier
- optical fibers: transmitter and receiver