AUTOMATION

- WORKSTATION


SYSTEM FOR THE STUDY OF PLC AND INDUSTRIAL AUTOMATION



         
BRIDGE SOLUTION
x Vertical modular system to optimize spaces
x Modular and easy to assemble, great reliability
x Available in three lengths 1000, 1500, 2000mm
x Available in two 800 and 1200mm depths
x Single-sided and two-faced arrangement with additional elements (drawers, drawers) optional
x Single work stations, side by side, in line or opposite
x Interlocking structure and accessories for a great strength and stability of the workstation
x The height of the adjustable worktop and the accessories at will allow the operator to customize his work environment

SYSTEM FOR THE STUDY OF PLC AND INDUSTRIAL AUTOMATION



         
MODULAR PANEL
The educational system has been designed to solve effectively and at competitive prices all the training issues related to the study of PLC and industrial process control.
The unit has a powerful industrial PLC that integrates the most current technologies to manage, both from a hardware and software point of view, all the typical process variables, thus ensuring a complete and effective training in a short time.
All the devices required to perform the exercises at every level of complexity are provided in the single unit for an easy practical check of circuits and automation systems.
Panel for the study and programming of PLCs complete with digital and analog I / O terminated on safety bushes, digital simulators, analog simulator, I / O signaling LEDs, programming software.

SINGLE PANELS


CUSTOMIZED PLC MODULE



         
CUSTOMIZED PLC MODULE

x Industrial PLC with digital inputs and outputs
x Aluminium plate with screen printing
x 24V DC power supply
x Inlet and outlet with 2mm bushings:


1. 16 inputs, 10 outputs
2. 24 inputs, 16 outputs
3. 24 inputs, 30 outputs
4. 30 inputs, 50 outputs

SIMULATION PANEL OF A SEMAFORIAN CROSS



         
SIMULATION PANEL OF A SEMAFORIAN CROSS

The panel allows simulation and PLC control of a complex semaphore junction. The inputs and outputs are terminated on 2 mm bushes while the luminous signals are ensured by groups of leds of various colors.

PANEL FOR THE CONTROL OF A DC MOTOR PLC



         
PANEL FOR THE CONTROL OF A DC MOTOR PLC

The panel provides on board a small power DC motor equipped with a simple control driver. Through the analog outputs of any PLC it is possible to perform speed regulation using a standard voltage signal in the 0-10Vdc range.
The rotation of the motor is indicated by a special disk keyed on its shaft.

PANEL FOR THE CONTROL OF A STEP BY-STEP MOTOR



         
PANEL FOR THE CONTROL OF A STEP BY-STEP MOTOR

The panel integrates on board a control for stepper motors whose inputs can be controlled and managed by the typical output signals of any PLC.
The stepper motor foreseen on board the module will behave according to the commands received. The unit is an excellent aid to carry out exercises in complexity

SIMULATION PANEL OF AN ELEVATOR MANAGED BY PLC



         
SIMULATION PANEL OF AN ELEVATOR MANAGED BY PLC

It allows to simulate the operation of a 3-storey elevator managed by any PLC as long as it has 24Vdc inputs / outputs.
The management of the push-button panels on the floor, in the cab and those for opening doors and light indications of the commands given by LEDs are implemented.

CONVEYOR BELT SIMULATOR



         
CONVEYOR BELT SIMULATOR

The small-scale unit has been designed to allow students to simulate, in an exhaustive and realistic way, the movement and selection of parts on a conveyor belt.
As in real devices, there are commands, sensors and actuators of various kinds that can be immediately interfaced with a PLC that uses standard 24Vcc inputs / outputs. The unit operates autonomously and is supplied complete with internal DC power supply, series of sensors, solenoid actuators, detectors, safety bushings, parts to be handled, workpiece compartments and manual controls.

SIMULATION PANEL OF NORMALIZED ANALOGUE SIGNALS



         
SIMULATION PANEL OF NORMALIZED ANALOGUE SIGNALS

Panel for the generation and reading of standardized analog voltage and current signals typically used by PLCs in the industrial field. It is complete with voltmeter - digital ammeter, voltage generators, current generators and I / V converter.
The aluminum panel is equipped with screen printing and the inputs and outputs are terminated on 2mm bushings for interfacing with the PLC in use.

SIMULATION PANEL OF DIGITAL SIGNALS



         
SIMULATION PANEL OF DIGITAL SIGNALS

The panel allows to send 24Vdc ON / OFF signals to any PLC. It is particularly useful for verifying application software and simulating small processes involving digital sensors.
On board there is also a series of LEDs that visually indicate the status of the outputs of the PLC in use.

PANEL WITH SENSORS AND TRANSDUCERS FOR THE SIMULATION OF PROCESSES



         
PANEL WITH SENSORS AND TRANSDUCERS FOR THE SIMULATION OF PROCESSES

The panel allows to bring to the inputs of the PLC in use, provided obviously provided with standard inputs, the typical standard analog or digital signals coming from the most common transducers used in industrial processes such as: tachometer dynamo, encoders, photocells and proximity sensors.
All the previous sensors provided on the panel are equipped with the related excitation devices and therefore completely autonomous.

SENSORS AND TRANSDUCERS TRAINER


OFMLD900



         
SENSORS AND TRANSDUCERS TRAINER



Input Transducers:
-Carbon track
-Wirewound & precision rotary potentiometers
-Slide potentiometers
-NTC thermistors
-Type 'K' thermocouples
-I.C. temperature sensor
-Photoconductive cell
-Photovoltaic cell
-Phototransistor
-PIN diode
-Linear variable differential transformer
-Linear variable capacitor
-Strain gauge
-Air-flow sensor
-Air pressure sensor
-Slotted opto-sensor
-Reflective opto-sensor
-Inductive Proximity Sensor
-Hall Effect sensor
-Precision servo-potentiometer
-Tacho-generator
-Humidity sensor
-Dynamic microphone
Output Devices:
-Heater
-Filament Lamp
-DC Motor
-Solenoid Air Valve
-Ultrasonic transmitter
-Buzzer
-Loudspeaker
-Relay
-Solenoid

Measuring Devices:
-Counter / Timer
-10-Point LED Bar Display
-Moving Coil Meter
-3 ½ Digital Voltmeter LCD
-3 ½ Digital Ammeter LCD

Power supply:
--5V, +5V /1A
--12V, +12V /1A

Item Included:
-Trainer
-Accessory and lead kit
-Manuals